Is it hard to carry 1911 bantam pistols?

The Bantam is one of the most friendly 1911 pistols for daily carry. The Bantam and Bantam-R were designed for daily carry and take considerations for this such as, size, parts conditioning, and comfort of carry. The Fusion Bantam pistols receive special hand blending during the parts conditioning and finishing processes. This extra hand preparation gives the customer a better carry experience with less catch points for clothing, a rounded butt for comfortable holster carry. In addition, the sights and pistol grip are designed for a clean and fast draw for quick target acquisition.

What are the 4 types of new gun accessories products?

Fusion introduces new accessories for their core lines of 1911 pistols and shotguns on a continuous basis. For updates on all of our products and tech-tips see our website and sign up for our newsletter

Yes. You will need to provide Fusion Firearms with a registered FFL dealer. We are only able to ship Serialized items including: Complete Firearms, Frames and Receivers to registered FFL dealers. You will be able to pick up your firearms from them

Yes. You will need to provide Fusion Firearms with a registered FFL dealer. We are only able to ship Serialized items including: Complete Firearms, Frames and Receivers to registered FFL dealers. You will be able to pick up your firearms from them.

Is there any warranty available?

We offer a limited lifetime warranty for the first purchaser of any of our firearms. The process is simple. Once you have purchased you firearms register it on our website. If you have any issue regarding workmanship or defects we will take care of the problem for you. For more information our warranty is in the tabs section next to the description.

What are the different types of payment modes you accept?

Fusion Firearms accepts several credit cards as a means of payment. These include any Visa Card, MasterCard, American Express and Discover. Enter your credit card number when placing the order and verify the number and order.

What is the frame size? Officer or full size

Hello Sir, The Riptide-C is a full size commander cut frame, with a bobtail / carry cut mainspring housing. Thanks again Fusion Firearms

Do these fit Para Ordnance double stack frames?

Hello Sir, No I am sorry this will not fit the Para frames these are meant for standard 2011 Poly grips like STI or SVI Thanks again Fusion Firearms

Is this U-notch sight (.325x.156) designed to fit Government 1911A1 pistols (70 series) in .45 ACP? I have a replica (Tisas "service" model), with the GI front & rear sights that I want to upgrade.

Hello Sir, No Fusions Rear U notch style sights are only for the .495 Novak style dovetail they will not work in the .330 Mil spec dovetail.

Will this fit a S&W 915?

Hello sir, Yes this will work for the 3rd Gen S&W models in 9mm

are these for a 5 or 6 inch spring

Hello Sir, These reverse plugs are contour-bored for the 5 inch gov't springs. The 5 inch Gov't Springs and 6 inch springs are the same.

Can these slide assemblies be mounted onto other 1911 lower frames, such as a Rock Island or Springfield Armory?

Hello Sir, Yes these will work with any 1911 Frame with a standard feed ramp.

What is the overall length of this guide rod and diameter where it goes through the plug?

Hello Sir, The over all length is 2.830 inch and the Dia of the end is .335 Thanks again

Is the 1911Slide6 drilled to accept the 9mm firing pin? For comparison, What diameter is the firing pin hole? Thx

Hello, Yes, all of Fusion's slides are cut to the 9mm firing pin hole specs(1/16" diameter) regardless of the slide's caliber.

Can you sub a 7791193 barrel for the barrel in this kit, when it comes back in stock?

Yes we can do this for you just email in for a custom quote.

does this come with the end cap? the selections for the 6 inch guide rod make no sense since the 6 inch cap must have a hole in it

Hello sir, Yes once you select your guide rod you can select the end cap, whichever one you will need or want.

Glad you are making these again. Do you make the 6” reverse plug end cap in SS for a 2 piece full length guide rod and bushing barrel config? I don’t see that option listed currently.

Hello sir Yes we will be making those again. They will be back in stock soon

Are the magwell and MSH (1911MSH27120) a single unit or two pieces that are screwed together?

Hello sir, Its a two piece unit that is screwed together.

1911 Build Kit - 4.25" CCO

Skip to the end of the images gallery

Skip to the beginning of the images gallery

1911 Build Kits

Rating:

100 % of 100

1 Review Add Your Review

$789.00

SKU

1911KitCCO

This "Build it yourself" will assemble to a ready-to-fire pistol (CCO Model Freedom Series), without grips.

This product is required to be sent to an FFL Dealer

Show more Show less

Notify me when this product is in stock

Back to Main Product Info

free shipping over $200

Hassle Free Returns

Write Your Own Review

Only registered users can write reviews. Please Sign in or create an account

Customer Reviews

Review by John

Posted on 2/11/21

Quality
100%

9mm CCO Kit

I perched the 9mm Freedom CCO kit from the original buyer who had lost interest after he ordered it. After building it and breaking it in, It has become my absolute favorite 1911, so much that I have ordered the 45acp kit. I am very happy with my CCO and do hope to ultimately have a 10mm and 40cal in the future.

CLICK HERE TO SEE EXLUSIVE DEALS UP TO 43% OFF

ABOUT US

DEALERS

OUTLET CENTER

DEALER OPPORTUNITIES

PRIVATE LABEL PARTS

OEM SUPPLY CAPABILITIES

NATIONAL DISTRIBUTORS

CONTACT US